Activity category - Certification

  • "Center for certification of railway products" LLC
    The product certification body offers you its services in the field of product conformity assessment to the requirements of the National Certification System of the Republic of Uzbekistan. The Law "About Certification of products and services" in the Republic of Uzbekistan provides for two types: mandatory and voluntary.

    Mandatory product certification is a confirmation of product safety, which is a mandatory requirement of legislation in the field of technical regulation.

    Voluntary certification is carried out at the manufacturer's own request. The result of the certification work is the receipt of a certificate of conformity. Conformity assessment is also carried out by the Certification Body through the acceptance of a manufacturer's compliance notice, which certifies that the products manufactured by it meet the established requirements.
    Resolution of the Cabinet of Ministers of the Republic of Uzbekistan No. 122 dated 28.04.2011 established a list of products subject to mandatory certification and identified additional measures to improve certification procedures and the introduction of quality management systems.
    The requirements for regulatory documents used in product certification are set out in the "Rules for Product Certification", registered by the Ministry of Justice of the Republic of Uzbekistan for No. 1458 dated 18.03.05.
    The deadlines for the certification of products are established in accordance with the "Rules of product certification", registered by the Ministry of Justice of the Republic of Uzbekistan No. 1458 dated 18.03.05, "Rules of certification for certain types of homogeneous products subject to mandatory certification", registered by the Ministry of Justice of the Republic of Uzbekistan for No. 1513, as well as the requirements of the fundamental documents of the National Certification System of the Republic of Uzbekistan.



    Documents required for registration of the certificate of conformity

    For certification of imported products:
    • product labeling sample (product information);
    • shipping document with a note on arrival at the customs territory of the Republic of Uzbekistan (waybill, invoice, invoice).
    To obtain a certificate of conformity for manufactured products:
    • a copy of the regulatory document for manufactured products;
    • product labeling sample (product information);
    • a copy of the sanitary and epidemiological conclusion (if necessary).
    The procedure for certification of products includes:
    • application for certification (application form);
    • analysis of regulatory documents for the claimed products and other documents attached to the application;
    • making a decision on the application;
    • identification, sampling;
    • preparation of the test program in accordance with the mandatory requirements of the product regulatory document;
    • inspection of the state of production (for certification schemes No. 3 and No. 4)
    • testing of samples in the testing laboratory;

    THE APPLICANT HAS THE RIGHT TO:
    - choose the form and scheme of conformity assessment provided for certain types of products that meet the established requirements;
    - apply for certification to any certification body whose scope of accreditation extends to the products that the applicant intends to certify;
    - to apply to the accreditation body with complaints about illegal actions of certification bodies and accredited testing laboratories (centers) in accordance with the legislation of the Republic of Uzbekistan;
    - use technical documentation to confirm the conformity of products with the established requirements, applicable to these products.

    THE APPLICANT MUST:
    - comply with the conditions of the certification procedure established by the Certification Body for products and provide various information necessary to assess the conformity of certified products;
    - provide copies of certification documents in accordance with the requirements of certification schemes;
    - to ensure the stability of indicators (characteristics) of products that are confirmed by a certificate of compliance with the requirements of regulatory documents;
    - to put into circulation products subject to mandatory conformity assessment only after such conformity assessment has been carried out;
    - indicate in the accompanying documentation information about the certificate of conformity or declaration of conformity;
    - comply with the established requirements, requirements of the certification body or certification schemes regarding the use of conformity marks, references to product certification in the media;
    - to submit to the authorized bodies of state control (supervision), as well as to interested persons, documents certifying the conformity of products with the established requirements (declaration of conformity, certificate of conformity or copies thereof);
    - suspend or terminate the sale of products if the certificate of conformity or declaration of conformity is suspended or terminated, with the exception of products put into circulation on the territory of the Republic of Uzbekistan, during the validity of the declaration of conformity or certificate of conformity, during the shelf life or service life of products established in accordance with the current legislation of the Republic of Uzbekistan;
    - to present all possibilities to the specialists of the Certification Body during the inspection of production or inspection control (in accordance with certification schemes);
    - to ensure the stability of indicators (characteristics) of products that are confirmed by a certificate of conformity;
    - notify the product certification body in advance in writing about all planned product upgrades (modifications), changes in its design (composition), production technology, test and control methods, acceptance rules. To carry out the planned modernization (modification) of products and other changes, only with the consent of the certification body of the products that issued the certificate;
    - notify the Certification Body of changes that may affect the fulfillment of requirements for conformity assessment facilities, including established certification schemes;
    - suspend production of products that have passed conformity assessment and do not meet the requirements of regulatory documents, based on decisions of authorized state control (supervision) bodies;
    - in case of suspension or cancellation of certificates of conformity, immediately stop using all advertising materials that contain any references to certification and return all documents from certification at the request of the certification body;
    - not to use the certification of its products in such a way as to harm the reputation of the Certification Body for products and not to make any statements about the certification of its products that the Certification Body may consider as unauthorized or misleading;
    keep records of all complaints (claims) for certified products and immediately notify the Product Certification Body in writing about them, take measures according to the decision of the Product Certification Body to identify and establish dangerous products.


    SCHEMES FOR CONFIRMING THE CONFORMITY OF PRODUCTS BY CERTIFICATION OF CONFORMITY
    Certain certification schemes are established in the relevant rules for the certification of homogeneous products and other regulations containing requirements for homogeneous products. At the same time, the complexity of the scheme, due to the volume of inspections, depends on the degree of danger of these products.

    The certification scheme is selected in each specific case by the certification body, taking into account the applicant's proposals, the volume and delivery time, test methods, production features and the risk of disruption of its stability, as well as the potential danger of these products to consumers.

    Certification within the framework of international systems or agreements is carried out according to the schemes provided for in them.


    Recommended certification schemes used in the National Certification System of the Republic of Uzbekistan (NSS RUz)


    Scheme No. 1
    it is used for the certification of a standard sample and provides for the testing of products in an Accredited Testing Laboratory (AIL) according to mandatory indicators, primarily safety. This scheme is also applied in the absence of a clearly defined regulatory document (ND) for products.


    Scheme No. 2
    it is used for certification of a standard sample and provides for testing of products in AIL to verify mandatory indicators. This scheme provides for the inspection control of products by testing samples taken in the field of trade (from the consumer).


    Scheme No. 3
    it is used for certification of manufactured products and provides for testing of products in the AIL to check mandatory indicators and inspection of production. This scheme provides for inspection control at the enterprise with testing of products taken from the manufacturer.


    Scheme No. 4
    it is used for certification of manufactured products and provides for testing of products in AIL to check mandatory indicators and inspection of production. This scheme provides for the inspection control of products by testing samples taken both from the sphere of trade (from the consumer) and from production.


    Scheme No. 5
    it is used for certification of manufactured products and provides for testing of products in AIL to check mandatory indicators, inspection of production or evaluation of the quality system. This scheme provides for inspection control with product testing and inspection of production (or evaluation of the quality system).


    Scheme No. 6
    is used in the certification of the quality system and provides for its assessment and subsequent inspection control.


    Scheme No. 7
    is used for the certification of a batch of products and provides for the testing of products.

    Scheme No. 8
    is used for certification of each individual product.


    Scheme No. 9
    is used in the certification of products and provides for the declaration of conformity of products with its safety requirements.

    Products certified according to the schemes №№ 3, 4, 5, 7, 8, 9 it can be marked with a conformity mark in accordance with the established procedure.

    If necessary, a copy of the sanitary and epidemiological conclusion and information about other requirements established in the ND (veterinary and phytosanitary conclusion, environmental certificate).


    THE DECLARATION MUST CONTAIN THE FOLLOWING DATA:
    name and address of the supplier submitting the declaration;

    product name, type or model number, as well as additional information characterizing the products (batch or series number, grade, etc.);

    the exact and full name of the normative documents to which there are references;

    product release date, batch or batch volume, expiration date, transportation period;

    date of submission of the declaration;

    Full name, position and signature of the authorized person acting on behalf of the supplier;

    link to quality system certification;

    the name and address of the testing laboratory, as well as a link to the document on its accreditation.


    At the discretion of the supplier, additional information confirming the conformity of the products is provided in the declaration.
    Advantages of registration of declarations of conformity in

    TEMIR YO'L MAHSULOTLARINI SERTIFIKATLASH MARKAZI LLC

    Specialists of the certification body of TEMIR YO'L MAHSULOTLARINI SERTIFIKATLASH MARKAZI LLC
    they will help determine your products in accordance with the list and the need for declaration. Our specialists will provide you with tangible assistance in passing the conformity assessment procedure, which will avoid many "pitfalls" and difficulties.

    You can get a preliminary free consultation from our experts by calling the hotline: +998(78) 150-13-69, or by sending a request by e-mail:
    info@ccrp.uz



    SCHEMES FOR CONFIRMING THE CONFORMITY OF PRODUCTS BY CERTIFICATION OF CONFORMITY

    Certain certification schemes are established in the relevant rules for the certification of homogeneous products and other regulations containing requirements for homogeneous products. At the same time, the complexity of the scheme, due to the volume of inspections, depends on the degree of danger of these products.

    The certification scheme is selected in each specific case by the certification body, taking into account the applicant's proposals, the volume and delivery time, test methods, production features and the risk of disruption of its stability, as well as the potential danger of these products to consumers.

    Certification within the framework of international systems or agreements is carried out according to the schemes provided for in them.

    RECOMMENDED CERTIFICATION SCHEMES USED IN THE NATIONAL CERTIFICATION SYSTEM OF THE REPUBLIC OF UZBEKISTAN (NSS RUZ)

    Scheme No. 1
    is used for the certification of a standard sample and provides for the testing of products in an Accredited Testing Laboratory (AIL) according to mandatory indicators, primarily safety. This scheme is also applied in the absence of a clearly defined regulatory document (ND) for products.


    Scheme No. 2
    it is used for certification of a standard sample and provides for testing of products in AIL to verify mandatory indicators. This scheme provides for the inspection control of products by testing samples taken in the field of trade (from the consumer).


    Scheme No. 3
    it is used for certification of manufactured products and provides for testing of products in AIL to check mandatory indicators and inspection of production. This scheme provides for inspection control at the enterprise with testing of products taken from the manufacturer.


    Scheme No. 4
    it is used for certification of manufactured products and provides for testing of products in AIL to check mandatory indicators and inspection of production. This scheme provides for the inspection control of products by testing samples taken both from the sphere of trade (from the consumer) and from production.


    Scheme No. 5
    it is used for certification of manufactured products and provides for testing of products in AIL to check mandatory indicators, inspection of production or evaluation of the quality system. This scheme provides for inspection control with product testing and inspection of production (or evaluation of the quality system).


    Scheme No. 6
    is used in the certification of the quality system and provides for its assessment and subsequent inspection control.


    Scheme No. 7
    is used for the certification of a batch of products and provides for the testing of products.


    Scheme No. 8
    it is used for certification of each individual product.


    Scheme No. 9
    is used in the certification of products and provides for the declaration of conformity of products with its safety requirements.

    Products certified according to the schemes №№ 3, 4, 5, 7, 8, 9 it can be marked with a conformity mark in accordance with the established procedure.